Blog: Mixing Valves, Electronic

There are four relays in the 6000 LegioMix control panel that can be used to perform certain functions.  The control does not have the ability to send voltage out they will only act as normally open dry contacts that close durnig differnt stages of the conrol opporation.  Relay 1(R1) remains open during the normal "adjustment" mode...

After you select a mounting location for your controller and install the actuator onto the body of the mixing valve, you will route the wire from the actuator back into the control module.   You will find a black, brown, green, red and white wire for your actuator.  Inside the control you will find a number of wring terminals and they are all...

When installing the 6000 Series LEGIOMIX®  Electronic Mixing Valve, remember to turn the battery switch to the ON position in the control.  This will activate charging the small 3.6V, 3-Cell...