5213

TubMixer™ Scald Protection Thermostatic Mixing Valve (sweat)

Description: 

Adjustable thermostatic high flow, point-of-use mixing valve for Roman Tubs and other high flow fixtures where protection from the danger of scalding caused by hot water is required.

With locking set point.
Complete with check valves on both hot and cold inlets.

Low-lead brass body.

Max working pressure: 150 psi
Max inlet temp: 185˚F
Adjustable range: 85˚ - 120˚F
Temp control: ± 3˚F

Min flow for optimum performance:  0.5 gpm

Compliance with the following codes:  IPC, IRC, UPC and NPC for use in accordance with the U.S. and Canadian plumbing codes

Compliance with the following standards:  
                   ASSE 1070
                   ASME A112.1070

                   CSA B125.70
                   CSA B125.3
                   NSF/ANSI 372 - Drinking Water System Components - Lead Content
                   Reduction of Lead in Drinking Water Act - California Health and
                      Safety Code 116875
                   S.3874 - Reduction of Lead in Drinking Water Act
                   Vermont Act 193 - The Lead in Plumbing Supplies Law
                   Maryland's Lead Free Law Hb.372 

→ Review ICC-ES Evaluation Reports

MasterSpec

Downloads

Certifications: 

  • ICC_ES_PMG-LOW_Lead

Drawings:

code description Cv weight
(lbs)
521349A ½" sweat 2 2.0
521359A ¾" sweat 2 2.0
521369A 1" sweat 2 2.0
521301A * replacement body, no fittings 2 1.5

* Refer to Fitting Selection Table.

Related products