TubMixer™ Scald Protection Thermostatic Mixing Valve (PEX)
Adjustable thermostatic high flow, point-of-use mixing valve for Roman Tubs and other high flow fixtures where protection from the danger of scalding caused by hot water is required.
With locking set point.
Complete with check valves on both hot and cold inlets.
Low-lead brass body.
Max working pressure: 150 psi
Max inlet temp: 185˚F
Adjustable range: 85˚ - 120˚F
Temp control: ± 3˚F
Min flow for optimum performance: 0.5 gpm
Compliance with the following codes: IPC, IRC, UPC and NPC for use in accordance with the U.S. and Canadian plumbing codes
Compliance with the following standards:
NSF/ANSI 372 - Drinking Water System Components - Lead Content
Reduction of Lead in Drinking Water Act - California Health and
Safety Code 116875
S.3874 - Reduction of Lead in Drinking Water Act
Vermont Act 193 - The Lead in Plumbing Supplies Law
Maryland's Lead Free Law Hb.372
|521347A||½" PEX crimp||2||2.0|
|521348A||½" PEX expansion||2||2.0|
|521357A||¾" PEX crimp||2||2.0|
|521358A||¾" PEX expansion||2||2.0|
|521367A||1" PEX crimp||2||2.0|
|521368A||1" PEX expansion||2||2.0|
|521301A *||replacement body, no fittings||2||1.5|
* Refer to Fitting Selection Table.