Many thermostatic mixing valve manufacturers, including Caleffi, specify minimum GPM flow rates for ...
Blog
Mixing Valves, Thermostatic
Blog post categories list
Blog post categories list
Hydronic Principles
Ask Caleffi Podcast
Mixing Valves, Thermostatic
Air and Dirt Separation
Domestic Hot Water Systems
Zone Valves and Radiator Valves
Air Vents
Water Quality
Balancing Valves
Mixing Valves, Electronic
Zone Relay Controls
Coffee with Caleffi Q&A
Solar Components
Hydraulic Separation
Manifolds and Mixing Stations
Pressure Reducing Valves
Articles
Filling and Backflow Prevention
Magnetic Separation
5 Things You Need To Know
Geothermal and Biomass
Certifications
Engineering Tools and Documentation
Heat Meters
April 21, 2020
There is plenty of information on the web about Legionella bacteria and why it is such a huge health issue in building water systems. It's a hot topic! Some plumbing engineers, de...
April 20, 2020
The 5212 Series SinkMixer™ is the perfect selection for that under sink application where the ...
December 14, 2018
We get a lot of tech support calls asking about proper piping of a point-of-distribution master mixi...
July 07, 2016
The new long 3/4" press tailpiece was developed mainly for two purposes: 1) the need ...
Caleffi offers a wide selection of models with and without check valves for your convenience to comp...
A slip nut is used to connect a tailpiece to a valve body when the nut inside diameter is too small ...
For a simple domestic hot water application, with a point-of-distribution mixing valve (ASSE 1017 ce...
February 10, 2016
The most basic, and typically the most economical, way to design a hydronic system for multiple temp...
January 08, 2016
Best practice is to pump away from the mixing valve, not into it. Connect the suction side of the pu...
May 28, 2015
Domestic water applications, particularly in North America, are challenging because our wa...
April 01, 2015
Caleffi Presscon™ press fittings make installation and maintenance of our products fast, ...